Commercial • Sales • Service • Parts

Buraschi RP7BR Industrial Net Sewing Machine

The Buraschi RP7BR PNEUMATIC net sewing machine is designed to satisfy the increasing demand for machines that sew thicker nets. Therefore, this model has been designed to be suitable for both medium and high seams of nets with or without knots or rope inserts up to 25mm in diameter.

The following are the main technical characteristics of the RP7BR PNEUMATIC net sewing machine model.

Sewing Capacity
Sewing thickness of 25mm is easily achieved, for example a net with No5 knot can be joined with a 18/20mm rope. For the aquaculture field and large scale fishing industry a 22mm rope can be sewn to 210/120 net without knots. The sewing area on the RP7BR netting machine is at the same level as the table for a better ergonomic operator position and to make it easier to work the corners of the nets.

Oversizing of Sewing Parts
Our RP7BR PNEUMATIC model is suitable for thicker nets, therefore sewing parts and all mechanical components are appropriately sized to withstand higher pressure. Key components have been completely redesigned and are manufactured by machining and not by casting.

Pressure Foot
A novelty of this machine is the pneumatic pressure foot that keeps a constant pressure on the material that is being sewn. Its lifting is bigger in order to facilitate the entrance and exit of the material.

Pneumatic Servo Assistance
As already implemented on RP5 BR Pneumatic, lifting of the pressure foot is controlled by an efficient and solid cylinder.

Double Traction Puller
An important technical design of this machine is the puller. With their whole range of net machines, Buraschi takes careful consideration with these elements and they test, build and patent these functions especially for their machines. Therefore they are not "standard" accessories found on the market and then adapted to the specific needs of the machine on which they have to be installed. The double traction puller installed on this machine is of the type with both upper and lower drive rollers, with a very powerful traction that suits the thicker nets this machine has to sew. The puller is synchronised with the length of the stitch and presses materials to be sewn with a pnaumatic cylinder 50mm in diameter. The main advantage is guaranteeing a constant pressure of the material to be sewn. This constant pressure is also guaranteed when different levels pass through the puller rollers and they respond very easily and without hesitation or blocking material that would have a negative effect on machine operation.

Electronic Motor
The new RP7BR PNEUMATIC is equipped with a very strong and pratical EFKA DC series electronic motor. This electronic motor, on the contrary to traditional motors, enables:
- Sewing speed to be adjusted with the pedal;
- The needle to be stopped in the pre-set position;
- The suitable speed for each operation to be chosen and programmed on the display;
- Better operation given the electronic motor has superior construction characteristics compared to traditional motors.

These are a few of the main characteristics of the new RP7BR PNEUMATIC model, version that is presented to the market after around 20 years of experience gained working with customers. As like SMA, Buraschi constantly enhances their technology and machine designs to provide you with more up-to-date machines that meet customers needs.

Purchase Package
The sewing machine is supplied with the following accessories:
- Air compressor and cleaning pistol
- Spare needles
- Sewing kit
- Wrenches
- Lubrication oil
- Thread support
- Kit double seam